Bottom Panel Labelers - Labeling Systems, Inc. LSI

This fully engineered and integrated Labeling Systems, Inc. Bottom Llabeling System is designed for the labeling of products with flat or recessed bottoms. Products can be labeled either filled or empty.

Shown here with the LSI Series 20 Print & Apply Labeling Head, the machine can also be configured with any LSI Labeling Head.

Click here for product data sheet .pdf format

Basic Operation Specifications*		Product Handling Features
Machine Speeds	up to 150 ppm	Infeed Options
Machine Accuracy	Up to +/- 1/32	Type	Spacer Wheel, Dual Infeed Belts
Product Size Range	Up to 9" x 11"	Conveyor Options
Overall Machine Dimensions	8'(l) x 4'(w) x 4'(h) typical	Type	Parallel belt type or end to end type
Electrical Requirements	115v, 60cycle, 10amp	Avail Lengths	8', 10', 12'
Air Requirements	2cfm, 80psi	Widths	Vary on package size and conveyor type
* Some specifications may change depending on the machine options specified. Consult LSI applications engineering for details		Heights +/- 2"	28", 32", 36", 40", 44"
		System Frame and Head Mounting

		Type	Fully integrated aluminum/steel frame, leveling pads std. and castors optional

Other Product Types
				LSI machines are not limited to the products or industries pictured here. Contact LSI Applications for details on your specific product.
Chipboard Carton or Box Labeling	Labeling of Plastic Containers	Labeling Clamshell Packages	CD Labeling or Media Labeling

Available Labeling Heads
Series 30 Apply Only Stepper motor drive with a 5" wide web capacity. Up to 400"/min dispense speed. PLC Control with operator interface panel. The labeling head features 10 recipe products pre-sets along with a self-teaching label sensor.		Series 40 Apply Only Stepper motor drive with 5" or 7" wide web capacity. Up to 1200"/per minute dispense speed. PLC controls with LCD operator interface panel. The labeling head features 50 recipe product pre-sets along with a self-teaching label sensor.
Series 20 Print & Apply Available with any OEM print engine. PLC controls are std. along with a 50 recipe product pre-set capability.		Series 2000 Print & Apply Available with any OEM print engine. PLC controls are std. along with a 50 recipe product pre-set capability. The machine features a fully enclosed aluminum plate housing for the head and a heavy duty web take up assembly.
Some Machine Features and Options
PLC Controls Easy to use LCD operator interface display includes product set-up recipes for ease of set-up. They can also be remote mounted for greater accessability.		Optional Slide Base This feature allows the labeling head to be pulled out from under the conveyor for ease of changeover or maintenance.
Air Cylinder Tamp Applicator This applicator type offers high accuracy and ease of set-up. Other applicator modules can be installed on the system as well.		Lot Code, Date Code, and Bar Code Printing Can be included using thermal transfer, laser or hot stamp technology.

Labeling Systems, Inc. LSI
32 Spruce Street
Oakland, New Jersey
Phone: 201-405-0767
Fax: 201-405-1179
Email: lsi@labelingsystems.com