|
|
This small Labeling Systems, Inc. Bench Top model utilizes the Series 30 Labeling Head. The adjustable cradle allows the operator to individually load round bottles. Changeover is performed without tools. The modular LSI design allows for the labeling heads to be removed and installed on a fully automatic turnkey labeling system. Click here for product datasheet (.pdf format)
|
| Basic Operation Specifications* | |
| Machine Speeds | up to 25 ppm rate is dependent on the operator |
| Machine Accuracy | Up to +/- 1/32 |
| Product Size Range | Up to 6"' dia x 14"(h) |
| Overall Machine Dimensions | 2'(l) x 2'(w) x 2'(h) typical |
| Electrical Requirements | 115v, 60cycle, 10amp |
| Air Requirements | 2cfm, 80psi |
| * Some specifications may change depending on the machine options specified. Consult LSI applications engineering for details | |
| Typical Product Types | |||||
 |
 |
 |
 |
 |
 |
|
Boston
Round Bottles or Pharmaceutical Labeling
|
Vial
Bottle Labeling
|
Shampoo
Bottles, Amenity Bottles or HBA Bottle Labeling
|
1
liter glass bottles or Beverage Bottle Labeling
|
Jar
Labeling or Labeling of HDPE Bottles or Jars
|
Labeling
Gallon Jugs
|
| Available Labeling Heads | ||||
| Series
30 Apply Only Stepper motor drive with a 5" wide web capacity. Up to 400"/min dispense speed. PLC Control with operator interface panel. The labeling head features 10 recipe products pre-sets along with a self-teaching label sensor. |
 |
Series
40 Apply Only Stepper motor drive with 5" or 7" wide web capacity. Up to 1200"/per minute dispense speed. PLC controls with LCD operator interface panel. The labeling head features 50 recipe product pre-sets along with a self-teaching label sensor. |
 |
|
| Series
20 Print & Apply Available with any OEM print engine. PLC controls are std. along with a 50 recipe product pre-set capability. |
 |
|||
| Some Machine Features and Options | ||||
| Easy
Adjust Product Fixture The machine sits on a bench top or similar work station. The operator loads a product into the adjustable fixture assembly. A foot pedal activates the label to be dispensed and fully applied to the product. |
|
PLC Controls Easy to use LCD operator interface display includes product set-up recipes for ease of set-up and changeover. |
 |
|
|
Lot Code, Date Code, and Bar Code Printing Can be included using thermal transfer, laser or hot stamp technology. |
 |
Wide Web and Product Capacity If the standard machine does not fit the product parameters, a wide width option can be included on the machine. |
 |
|
Labeling Systems, Inc. LSI
32 Spruce Street
Oakland, New Jersey
Phone: 201-405-0767
Fax: 201-405-1179
Email: lsi@labelingsystems.com