|
|
The optional LSI Series 40F or Series 3000S Labeling Head uses an encoder for precise speed matching should the speed of the conveyor change. Other LSI labeling heads can be installed on the system to insure a labeler that is the best match for the application. |
| Basic Operation Specifications* | Product Handling Features | |||
| Machine Speeds | up to 300 ppm | Infeed Options | ||
| Machine Accuracy | Up to +/- 1/32 | Type | Dual Infeed Belts or Infeed Screw | |
| Product Size Range | Up to 8' dia x 14"(h) | Conveyor Options | ||
| Overall Machine Dimensions | 8'(l) x 4'(w) x 5'(h) typical | Type | Aluminum plate - delrin chain | |
| Electrical Requirements | 115v, 60cycle, 10amp | Avail Lengths | 8', 10', 12' | |
| Air Requirements | 2cfm, 80psi | Widths | 3",4 ½", 6" | |
| * Some specifications may change depending on the machine options specified. Consult LSI applications engineering for details | Heights +/- 2" | 28", 32", 36", 40", 44" | ||
| Top Hold Down | ||||
| Type | Fully enclosed aluminum plate - linetex belt with cap torque compensation | |||
| System Frame and Head Mounting | ||||
| Type | Fully integrated aluminum/steel main frame, stainless side panels,leveling pads std. Stainless Steel frame and and castors optional | |||
| Typical Product Types | |||||
 |
 |
 |
 |
 |
 |
|
Boston
Round Bottles or Pharmaceutical Labeling
|
Polystyrene
Bottles or Nuticeutical Labeling
|
Shampoo
Bottles, Amenity Bottles or HBA Bottle Labeling
|
1
liter glass bottles or Beverage Bottle Labeling
|
Jar
Labeling or Labeling of HDPE Bottles or Jars
|
Clear
Label Bottle or Cosmetic Bottle Labeling
|
| Available Labeling Heads | ||||
| Series
40 Apply Only Stepper motor drive with 5" or 7" wide web capacity. Up to 1200"/per minute dispense speed. PLC controls with LCD operator interface panel. The labeling head features 50 recipe product pre-sets along with a self-teaching label sensor |
 |
Model
3000S Apply Only Stepper motor drive with up to 7" wide web capacity. Label dispense rate is up to 2000"/min |
 |
|
| Model
3000Z Apply Only Servo motor drive promotes high speed and accuracy with encoder feedback. Up to 7" wide web capacity. Label dispense rate is up to 4000"/min |
 |
|||
| Some Machine Features and Options | ||||
|
PLC Controls Easy to use LCD operator interface display includes 50 product set-up recipes for ease of set-up and changeover. |
 |
Bar Code Reader Can be installed on the labeling head to verify the presence or match the barcode. The reader can be tied to a product reject station. |
 |
|
|
Infeed Spacing Systems The Series 4500 can have several types of infeed systems installed. Devices such as dual infeed belts or infeed screws are used for heavier products or applications demanding fast rates of labeling. |
 |
Lot Code, Date Code, and Bar Code Printing Can be included using thermal transfer, laser or hot stamp technology. |
 |
|
|
Slide Base Assembly This option allows the labeling head to be easily positioned under the top hold down for panel labeling applications or moved directly to the wrap station for wrap labeling. This features minimizes or eliminates applicator change parts. |
 |
Top Hold Down Assembly The LSI top hold down is a heavy duty design that is fully enclosed and supported by anodized aluminum plates. The assembly can be raised up an down to accommodate products as short as 1" or as tall as 14". |
 |
|
Labeling Systems, Inc. LSI
32 Spruce Street
Oakland, New Jersey
Phone: 201-405-0767
Fax: 201-405-1179
Email: lsi@labelingsystems.com