| Peeler
Bar Extension - Print and Apply Peeler extensions are used for short labels that are under spec for the print engine being used. They can be used in lieu of label backfeed which slows down the label application |
Available on: |
![]() |
| Peeler
Bar Extension - Apply Only Extends the standard peeler bar by 6". This is typically used in wipe or roll-on type applications |
Available
on: 30 3000CB 3000S 3000Z 40 |
![]() |
| Applicator(Snorkel)
Extension Assembly This assembly will remote the peeler bar and applicator away from the head. It is used where there is no room for the labeling head to reach into the area of application such as a vertical form/fill/seal installation. Assemblies are available in the following lengths: 6" 12" 18" 24" Custom lengths (up to 24") Note: labels will be in queue for P/A applications |
Available
on: 20 2000 30 3000CB 3000S 3000Z 40 |
![]() |
|
0-90 degree Swing
Assembly This feature is standard on the Model 300 Head |
Available
on: 3000CB 3000S 3000Z |
![]() |
| APP-CP
PLC Control Package Some applicators require logic provided through a PLC. On machine where a PLC is not used as the labeling head controller, this option is required |
Available
on: 3000CB 3000S |
|
| The air package is typically included with the applicator. It can be ordered separately with the labeling head as follows: | ||
|
Air Assist Air
Package For the Series 3000 a mounting panel, panel mount regulator, and gauge are provided |
Available on: |
![]() |
|
Venturi Vacuum
Package For the Series 3000 a mounting panel, panel mount regulator, and gauge are provided. |
Available
on: 20 2000 30 3000CB 3000S 3000Z 40 |
![]() |
Labeling Systems, Inc. LSI
32 Spruce Street
Oakland, New Jersey
Phone: 201-405-0767
Fax: 201-405-1179
Email: lsi@labelingsystems.com