Roll-On Model 020
Roll-On Model 021 (includes peeler extension):
The roller, is made of foam or rubber, is spring loaded and mounted just ahead of the peeler bar. The limitations of the roll-on applicator are that the label must feed in the direction of product travel and the surface is usually flat or with a slight oval. The key to a successful roll-on application is that either the web speed must match the speed of the product or the product speed must match the speed of the label web.

Specifications:
Roller Materials
Foam or urethane
Labeler Series
30/40/3000
Placement Accuracy
+/- 1/32
Max. label width
See Head Specs
Max. label length
N/A
Max. Rate based on a 2" long label

235/min
(Model 30)
470/min
(Model 40)
610/min
(Model3000CB)
940/min
(Model 3000S)
1880/min
(Model 3000Z)

 
Wipe-on Model 010 (brush type):
This method utilizes the same principles of the roll-on applicator with the exception that a brush or wipe assembly replaces the roller. This type is usually selected with products that have high and low areas in the label placement area (ex. recessed panel) or products that are irregular in shape.

Specifications:
Wipe Materials
Brush, urethane, stainless steel
Labeler Series
30/40/3000
Placement Accuracy
+/- 1/32
Max. label width
See Head Specs
Max. label length
N/A
Max. Rate based on a 2" long label
235/min
(Model 30)
470/min
(Model 40)
610/min
(Model3000CB)
940/min
(Model 3000S)
1880/min
(Model 3000Z)

 

Labeling Systems, Inc. LSI
32 Spruce Street
Oakland, New Jersey
Phone: 201-405-0767
Fax: 201-405-1179
Email: lsi@labelingsystems.com