Horizontal Tube

The Series 30 and Series 40 uses a rigid tube assembly. It is installed to either the top or the bottom plate of the labeling head.

The mounting bracket that attaches to the head enables the head to be fully rotating in all directions.

The tube has a standard length of 12".

Cradle Mount

The Series 20, Series 2000 and Series 3000 use a cradle mount to secure the head to the stand.

The cradle can be mounted in either a top/bottom configuration or a side/side configuration. This gives the machine the ability to rotate into any configuration.

Cradle Extension Assembly

To increase the range of adjustment to either the Model 105 or Model 100 T Base Stands, the optional cradle extension assembly can be added.

The addition of this assembly adds 12" to the range of adjustment. It can be installed to raise the head higher or inverted to drop the labeling head lower.