The assembly meters product to control product spacing and system throughput. Its 6 1/4" diameter wheel and 1/2" wide rubber tire accurately control the flow of most round, oval and rectangular products.

The centerline of the tire is adjustable from 3/8" to 2" above the conveyor surface. Double stacked wheels are available to accommodate taller products.

The Model SW can be adjusted to accommodate various product widths. The surface of the tire can reach over the conveyor surface from 0" to 2''.

The standard DC motor and drive controller is designed for speeds from 40 IPM to 410 IPM. An optional AC motor with variable frequency drive controller is available.

Product Specifications
The Spacer Wheel is designed to accommodate round products with the following characteristics. Consult Factory for applications requiring larger or smaller dimensions.

Conveyor Installations
Model SW mounts to the T-slots in LSI's table top chain conveyor with 4 bolts and T-nuts.

The assembly consists of two opposed 1" wide, Linatex® coated timing belts that grip products from the sides. Used primarily for spacing products at the infeed end of a system, spacer belts provide up to 10 times more holding force than a typical spacer wheel.

The Model SB can also be used to support products from the sides for bottom labeling or to transfer products from one conveyor to another.

The Model SB is constructed using anodized aluminum plates for strength and durability. Stainless steel support shafts with ball bearings insure optimal performance.

Product Specifications
The Model SB is designed to accommodate products with a round, oval or rectangular footprint with the following characteristics: Consult Factory for applications requiring larger or smaller dimensions.

Conveyor Installations
Model SB mounts to the T-slots in LSI's table top chain conveyor with 8 bolts and T-nuts.The standard AC motors and drive controller are designed for speeds from 400 IPM to 1600 IPM.

The infeed screw assembly accurately meters, spaces and aligns products for labeling.

Designed for use in primary labeling applications such as consumer products labeling, pharmaceuticals labeling, home products labeling and cosmetics labeling.By precisely controlling product pitch, the Infeed Screw provides the maximum product throughput at any given conveyor speed, increasing efficiency and accuracy.

Screw profiles are custom designed for each product. In some cases, a single screw profile can be designed to accommodate multiple product configurations. Most applications require multiple screw change parts. Consult the factory for details.

A Dual Screw version is available to accurately align and meter oval or irregular shaped products.

Product Specifications
The screw drive assembly provides easy vertical and horizontal adjustment for quick product change over. Consult Factory for applications requiring larger or smaller dimensions

Conveyor Installations
Model SD mounts to the T-slots in LSI's 3" wide and 4.5" wide table top chain conveyor with 4 bolts. The standard AC motor and variable frequency drive controller is designed for conveyor speeds from 200 IPM to 1200 IPM.