Labeling Systems

COMPARE

Series 30 Labeling Head
Apply Only Labeling Head from Labeling Systems

The Series 30 is an apply only labeling head that can accommodate 5" web widths, 12"and 16" diameter unwind rolls and is able to reach dispensing speeds up to 400" per minute. The Series 30 is an easily convertible model and is also designed to work with any of LSI's standard applicators.

Stepper Motor Drive - Series 30
Apply Only Labeling Head from Labeling Systems

The stepper motor drive on the Series 30 apply only labeling head controls all the functions of the labeler. The 5 phase stepper motor is able to provide maximum torque and precise speed control as well as includes 10 recipe storage locations for easy set-up or change over.

Remote Display Mounting Kit - Series 30
Apply Only Labeling Head from Labeling Systems

The remote display mounting kit for the Series 30 apply only labeling head allows you to mount the display in a convenient location for you, regardless of where the labeling head is located.

Fiber Optic Label Sensor - Series 30
Apply Only Labeling Head from Labeling Systems

The label sensor on the Series 30 apply only labeling head is a fiber optic unit. The fiber optics are mounted in a block near the tip of the peeler bar, which minimizes the effect of label converting variables. The label sensor includes an auto-teach feature that automatically adjusts the sensitivity of the label sensor.

Clear Label Sensor - Capacitive Type - Series 30 from Labeling Systems

The clear label sensor on the Series 30 apply only labeling head is used for labels that have no visually distinguishable leading or trailing edge. The clear label sensor works by measuring the capacitance between the sensor and the peeler bar and can distinguish the difference between the label and the gap between the labels.

Clear Label Sensor - Ultrasonic Type - Series 30 from Labeling Systems

The ultrasonic, clear label sensor on the Series 30 apply only labeling head detects the leading or trailing edge of a label by using high frequency sound waves. The sensitivity of the label is adjusting by the self teach feature of the labeling head.

Microswitch Label Sensor - Series 30
Apply Only Labeling Head from Labeling Systems

The microswitch label sensor is used when the clear label sensor is not an option. This takes place when there is the presence of metalized inks or material during the labeling process.

Web Width Options - Series 30
Apply Only Labeling Head from Labeling Systems

The Series 30 apply only labeling head is available only as a 5" wide web version. To ensure that the drive and nip rollers on the labeling head remain parallel, the rugged 3 point drive and nip mounting structure is utilized.

12 Inch Unwind Assembly - Single Roller Dancer Arm - Series 30 from Labeling Systems

The base Series 30 apply only labeling head includes the 12" unwind assembly with single roller dancer arm. This particular unwind option works best at moderate dispense speeds with relatively short labels. This labeling head configuration provides a short web path for easier threading.

12 Inch Unwind Assembly - Double Roller Dancer Arm - Series 30 from Labeling Systems

The next step up from the base Series 30 apply only labeling head is the Series 30 model that includes the 12" unwind assembly with a double roller dancer arm. The double dancer configuration improves the performance at higher speeds and with longer labels.

16 Inch Unwind Assembly - Double Roller Dancer Arm - Series 30 from Labeling Systems

The 16" unwind assembly with double roller dancer arm can accommodate up to 80% more labels than the 12" model, increasing the run time in between roll changes. The 16" unwind assembly with double roller dancer arm is only available in a 5" wide version.

Rewind Slaved from Web Drive - Series 30
Apply Only Labeling Head from Labeling Systems

The base option on the Series 30 apply only labeling head has a rewind option that is slaved from the web drive stepper motor. This slaved rewind web drive stepper motor can accommodate a rewind roll up to 7-1/4".

Low Label Web Break Alarm Package - Series 30 from Labeling Systems

The low label web break alarm package for the Series 30 apply only label head is able to detect and announce the status of the label unwind reel and the label web. The sensors on the alarm package option are able to detect when the roll of labels is low or there is a label out/web break.

Mounting Options - Series 30
Apply Only Labeling Head from Labeling Systems

The mounting options on the Series 30 apply only labeling head are the same as on the Series 40. To allow substantial mounting flexibility, flange mounting holes on the top, bottom and side panels.

5 Inch Wide - Double Dancer Field Conversion Kit - Series 30 from Labeling Systems

The 5" wide double dancer field conversion kit for the Series 30 apply only labeling head includes a two-roller dancer arm and an idler roller. It can be used on both the right hand and left hand apply only labeling heads.

16 Inch Unwind Field Conversion Kit - 5 Inch Wide - Series 30 from Labeling Systems

The 16" unwind field conversion kit, which is 5" wide, comes standard with a complete unwind assembly with mounting post, unwind roller, 16" unwind disks, double dancer arm and an idler roller. This conversion kit is shipped as a right hand assembly, but can be converted for a left handed user.